10
Multiple Cameleon Floods (Master/Slave control)
1.
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2.
Use a 3-p XLR cable to connect the Cameleon Flood 7.
The pins:
1.
Earth
2.
Signal -
3.
Signal +
3.
Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
You can
use the same functions on the master device as described on page 14 (Built-in Programs or Autorun
).
This means on the master device you can set your desired operation Mode and all slave devices will
react the same as the master device.
Multiple Cameleon Floods (Master/Slave control)
Fig. 3
Summary of Contents for Cameleon Flood 7 RGB
Page 1: ...Cameleon Flood 7 RGB ORDERCODE 42689...
Page 20: ......
