10
Order code: 44510
Pixel Controller
Multiple Pixel Controllers (Master/Slave Control)
01)
Fasten the controller to a firm trussing or place it on a flat surface. Leave at least 0,5 meter on all
sides for air circulation.
02)
Always use a safety cable (order code 70140 / 70141).
03)
Connect the Pixelstrips.
04)
Use a 3-pin/5-pin DMX cable to connect the controllers.
The pins:
01)
Earth
02)
Signal –
03)
01)
Earth
02)
Signal –
03)
04)
N/C
05)
N/C
05)
Link the units as shown in Fig. 05. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX cable. Repeat this process to link the rest of the units.
You can use the same functions on the master device as described on page 23 (Auto mode,
Manual mode). This means that you can set your desired operation mode on the master device
and all slave devices will react the same as the master device.
Fig. 05
Note: Link all cables before connecting electric power
