9
Ordercode: 42685
Cameleon Bar 24/1 UV
Multiple Cameleons (DMX Control)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Use a 3-pin XLR cable to connect the Cameleons and other devices.
04)
Link the units as shown in fig. 04. Connect a light controller to the first unit's DMX "in" socket, using the
42708
– DMX input cable. Connect the first unit’s "out" socket with the second unit's "in" socket, using
the
42707
– DMX Extension cable, Link the second, third, and fourth units using the
42707
– DMX
Extension cable.
05)
Supply electric power: Plug electric mains power cords into each unit's special IP65 power IN socket,
then plug the other end of the mains power cord into proper electric power supply sockets, starting
with the first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Cameleons DMX Set Up
Fig. 04
Note : Link all cables before connecting electric power
Summary of Contents for 42685
Page 19: ...18 Ordercode 42685 Cameleon Bar 24 1 UV Dimensions...
Page 20: ...2015 Showtec...
