8
Ordercode: 40312
LED Aircone DMX
One LED Aircone (AUTO Mix Color Control)
01)
When dipswitch #9 and #10 are turned on, the LED Aircone is in AUTO Mix Color Mode.
Dipswitches #1 - #7 control the changing speed.
One LED Aircone (Manual Control)
01)
When the dipswitches #8, #9 and #10 are turned on, the LED Aircone is in Manual Mode
Dip Switches #1 and #2 control the brightness of the Red LEDs.
Dip Switches #3 and #4 control the brightness of the Green LEDs.
Dip Switches #5 and #6 control the brightness of the Blue LEDs.
Brightness grades, Example RED :
00
Dipswitch Setting:
= 0%
10
Dipswitch Setting:
= 25%
01
Dipswitch Setting:
= 50%
11
Dipswitch Setting:
= 100%
Multiple LED Aircones (DMX Control)
01)
When all dipswitches are turned off, the LED Aircone is in DMX Mode.
02)
Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp bolted onto the
Showtec LED Aircone bracket) or set the LED Aircone down on any flat surface. Leave at least 0,5
meter on all sides for air circulation.
03)
Plug the end of the electric mains power cord into a proper electric power supply socket.
04)
Use a 3-pin XLR cable to connect the LED Aircones.
The pins:
01)
Earth
02)
Signal (-)
03)
Signal (+)
