7
Ordercode: 40312
LED Aircone DMX
Installation
Remove all packing materials from the LED Aircone DMX. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be music-controlled by its built-in
microphone.
To use the Dipswitches, you first have to unscrew the protection cover.
Fig. 02
Control Modes
There are 4 modes:
Sound-controlled
Auto Mix Color
Manual Mode
DMX
One LED Aircone (Sound-controlled)
12)
When dipswitch #10 is turned on, the Aircone will automatically change its color to the beat of the
music.
13)
With the Audio Sensitivity control you can adjust its music-sensitivity.
