14
ACT Fresnel 150 WW
Product code: 34012
Angle Adjustment
You can adjust the angle of the device with the adjustment handle (06).
Turn the adjustment handle (06) counterclockwise to loosen it.
Tilt the device to the desired angle (see Fig. 07).
Turn the adjustment handle (06) clockwise to tighten it. Make sure that the device cannot move
freely after the adjustment handle (06) is tightened.
Fig. 07
Barndoor Installation
The ACT Fresnel 150 WW is delivered with a barndoor. To install the barndoor, follow the steps below:
01)
Push the spring-loaded screw (01) and at the same time lift the color frame clip (02) and flip it
backwards (see Fig. 08).
02)
Insert the barndoor into the color frame holders (04) (see Fig. 09).
03)
Pull the color frame clip (02) downwards to release the spring-loaded screw (01) (see Fig. 10). The
barndoor will be locked in position.
Note:
Make sure that the barndoor is locked in position with the color frame clip before using the device.
Fig. 08
Fig. 09
Fig. 10
