
27
Pinspot Bar 4 RGBW
Product code: 30295
Program 01
If you have chosen program 01, the display will show:
Press the UP/DOWN buttons to choose one of the 2 options:
●
COLOR
●
STROBE
Press the SETUP button to enter the desired menu.
If you have chosen COLOR, press the UP/DOWN buttons to choose one of the 33 color macros. Press
the SETUP button to save your settings.
If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The adjustment
range is between 0–99, from OFF to high frequency. Press the SETUP button to save your settings.
Programs 02–23
If you have chosen one of the programs 02–23, the display will show:
Press the UP/DOWN buttons to choose one of the 2 options:
●
SPEED
●
STROBE
Press the SETUP button to enter the desired menu.
If you have chosen SPEED, press the UP/DOWN buttons to set the built-in program’s speed. The
adjustment range is 1–100, from slow to fast. Press the SETUP button to save your settings.
If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The adjustment
range is 0–99, from OFF to high frequency. Press the SETUP button to save your settings.
Master/Slave Mode
In this menu you can set the device as a slave.
While in the main menu, press the UP/DOWN buttons to choose SLAVE.
Press the SETUP button to enter the menu. The display will show:
Press the UP/DOWN buttons to choose YES or NO.
Press the SET button to confirm your choice.
If you have chosen YES, the device will be set as a slave and will react the same as the master
device.