background image

 
 
 
 
All information in this operating manual has been checked to the best of our knowledge and belief. 
However, neither the author nor the publisher can be held liable for any damages related to the use 
of this manual. 
 
Other product, brand and company names mentioned in this document may be the 
trademarks of their respective owners. The user of this document is responsible for 
compliance with all applicable copyright laws. 
 

 

Caution 

Please observe the following basic instructions in order not to endanger yourself or others 
and to avoid damage to external devices. 
 

 

Warnings 

Do not disassemble or modify the product. This could result in injury from electric shock.  
If you notice that the power cord shows obvious signs of wear, the appliance is 
malfunctioning, smells burnt or smokes, immediately unplug the appliance from the wall 
outlet and refer servicing, maintenance or repair to an authorised service centre or your 
dealer. 
Before cleaning the product, you should turn it off and disconnect it from the power supply. 
Always place the product on a flat, stable surface to ensure a secure stand. 
Do not use the product in a damp or wet environment. 
Do not place containers filled with liquids, such as vases, glasses or bottles, on the product. 
Do not place small objects on top of it that could slide in, such as hairpins, sewing needles or 
coins. 
 

 

Precautions 

To avoid damage to the product, do not place it in places with high temperatures or a lot of 
dust, do not place it directly next to an air conditioner and avoid direct sunlight. 
Do not place the article near other electrical equipment to avoid interference. 
Do not use force when handling the product or place heavy objects on it. 
Disconnect the power supply if you are not going to use the device for a longer period of 
time. To disconnect the power, pull the plug, not the cable. 
Please handle the power cable with care. It should not be near radiators, do not place heavy 
objects on it and lay it in such a way that no persons can step on it or fall over it. 

 
 

 

Summary of Contents for LDO-10 MKII FS














Reviews: