Showlite LDO-10 MKII FS User Manual Download Page 2

 

 

Thank you for choosing this product. To ensure that you are completely satisfied 
with this product, please read and understand this manual carefully. 

PLEASE READ CAREFULLY

 

Please keep this manual in a safe place for future reference. Hand over all documents when 
passing on the product to third parties. Never leave children unattended with the packaging 
material. For products packed in plastic bags, there is a risk of suffocation from packaging 
materials. The product should only be used under adult supervision. Only use the product if it 
is in perfect condition. Do not use the product if damage is visible or suspected. We are not 
liable for any damage that occurs as a result of non-observance of the safety instructions or 
incorrect or improper handling. 
 

 

Follow the operating instructions! 

 

 

The WARNING signal word identifies hazards that, without precautions, 
could result in serious injury. 

 

 

The signal word NOTE indicates general precautions that should be 
observed when handling the product 

 

 

Images and screen images in this manual may differ slightly from the 
actual product's appearance, as long as it does not adversely affect the 
technical characteristics and safety of the product. 

 

 

All personal phrasing in this manual should be considered gender 
neutral. 

 
This operating manual applies to responsible users and to persons who have been 
supervised or instructed in the operation of the device by a person responsible for their 
safety and who have proven that they are capable of handling the device. 
 

 

Children should be supervised to ensure that they do not use this 
device as a toy.  
Never allow children to play unattended with the packaging material. 

 

 

Risk of damage to property! We are not liable for accidents that occur 
as a result of non-observance of the safety instructions or incorrect 
handling. 

 
 

 

Summary of Contents for LDO-10 MKII FS














Reviews: