Showgear 950200, Manual

Page: 12 / 16

11
Ordercode: 950200
VIBE FX Strike
Control Modes
There are 3 modes:
● Auto
● Sound-controlled
● Intelligent
One Strike (Auto, Intelligent)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) The Strike functions as a stand-alone device. See page 12 for more information about Auto and
Intelligent mode.
One Strike (Sound-controlled)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Turn on the music. If the device is set to sound-control, then the Strike will react to the beat of the
music. Please see page 12 for more information about the sound-control options.
Remote Control
Fig. 03
Button Function Description
Blackout Press to black out the output/restore the output.
Intelligent Press to activate Intelligent mode.
Auto/Sound Press to activate Auto or Sound-controlled mode.
Motor rotation ON/OFF Repeatedly press to activate/deactivate the motor rotation.
Laser color Repeatedly press to set the laser color (red, green, red+green).
Rotating speed
Repeatedly press to set the rotation speed. There are 5 steps,
from slow to fast.
Step speed
Repeatedly press to set the step speed. There are 5 steps, from
slow to fast.
Flash frequency
Repeatedly press to set the strobe frequency. There are 3 steps
(from low to high frequency) and OFF.
MIC sensitivity Repeatedly press to decrease/increase the sound sensitivity.