background image

Warranty Information

2 Year Limited Warranty

Showerbuddy warrants all Showerbuddy shower chairs for two years from the date of purchase by the user.  
Proof of purchase from an authorised Showerbuddy Dealer is required for any claim.

This warranty covers any defects in materials and workmanship on all Showerbuddy shower chairs except 
those listed in the Warranty Exclusion below:

Warranty Exclusions

          

• 

Product or parts failure from normal wear and tear

• 

Damage caused by failure to adhere to the Owner’s Manual

• 

Damage from improper assembly, use or repair

• 

Seat cushions and padded arm rests

• 

Any chair not purchased from an authorised Showerbuddy Dealer 

Limitations

• 

The warranty is VOID if the original serial number tag is removed or altered

• 

The warranty is VOID if the shower chair sustains damage from unnatural causes

• 

The warranty is VOID if the weight limit of 300lbs (136kg) is exceeded

• 

The warranty is VOID if the shower chair has been subjected to neglect, improper  

 

 

 

maintenance, storage, cleaning or operation as defined in the Owner’s Manual

• 

The warranty is VOID if the shower chair is modified without Showerbuddy’s written consent

• 

This warranty applies to the original purchaser only, from the date of the purchase. 

Your Responsibilities

• 

If your shower chair requires warranty service, please contact the dealer from which  you  

 

 

purchased the Showerbuddy shower chair.

• 

If you do not receive satisfactory dealer service, contact Showerbuddy at the address below

• 

Do not return the shower chair to Showerbuddy without first obtaining a Return Authorization    

 

Number from Customer Service

• 

A defective shower chair must be shipped to Showerbuddy within 14 days of issuance of a  

 

 

Return Authorization Number by Customer Service

SB6 Roll-in Shower Chair

28

Summary of Contents for SB6c


































Reviews: