Step 7
The Commode Bucket (part #500-072)
can be pushed into position from the
rear of the chair and is held in position
by the Commode Bucket Connectors
(part #500-095) pre-fitted to the
cushion at the factory.
The Commode Bucket lid is for use
after the bucket has been removed
from the chair.
A Commode Deflector (part #500-074)
is able to be fitted to the Commode
Bucket after the bucket is fitted to the
chair. The deflector may be fitted after
the User is seated to allow easier
transfers of the User to and from the
chair.
You can also fit the deflector without
the bucket by sliding it into the factory
fitted clips (part #500-255) on the seat
base
The chair is now fully assembled and
ready for use.
SB6 Roll-in Shower Chair
10
