17
Auto Play
Using the CypherLiteUSB software you can also set the unit up to run a cue as soon as it powers up. This
may be useful in settings where the projector is used for advertisement or to project logos and does not
require an operator.
1)
Right-click on the cue you wish to use for Auto-Play, Select “Edit” look to the bar at the top.
2)
To the far right, select “Cue properties”.
3)
Select the check box at the bottom of the properties page.
4)
After you upload this change to the SmartMedia card and cycle the power to the projector, you will
see this cue play automatically after power up.
5)
If you wish to play multiple cues automatically simply link the cues in the desired order.
