ShoreTel Mobility Router 4000 Installation
Using the Initial Configuration Wizard
1
10
ShoreTel Mobility Router 4000 Series Hardware Installation Guide
1.9
Using the Initial Configuration Wizard
In the terminal emulation software window, use the initial configuration wizard to initially
configure the Mobility Router. After initially configuring and restarting the Mobility Router,
access the RoamAnywhere Administration Portal to configure, manage, monitor, and
troubleshoot the Mobility Router.
Before starting the wizard, have the following information available:
Mobility Router hostname
If not using DHCP:
Mobility Router IP address
Subnet mask
Default gateway for Mobility Router
IP address of primary DNS server
Domain name for the Mobility Router
Password for administrative access to Mobility Router
To use the initial configuration wizard:
1
At the login prompt, type
admin
and press
Enter
.
2
When prompted to accept the End User License Agreement, enter
YES
to accept. The
initial configuration wizard starts.
3
Enter
Y
to use the wizard.
4
Enter the DNS hostname of the Mobility Router. The hostname can be in short-name
format or a fully qualified domain name.
5
At the ‘Use DHCP on ETH0’ interface prompt, do one of the following:
To use DHCP, enter
Y
, and go to Step 11.
Enter
N
if DHCP is not desired. Continue to step 6.
NOTE
We recommend using a static IP address so that the IP address of the Mobility
Router does not change. If using DHCP, make sure to reserve an IP address for the
Mobility Router.
6
Enter the Mobility Router's primary IP address.
NOTE
A secondary IP address can be configured using the Administration Portal.
7
Enter the subnet mask in the format of a 32-bit mask or classless interdomain routing
(CIDR) notation.
8
Enter the IP address of the default gateway for the Mobility Router.
9
Enter the IP address of the primary DNS server.
