13
Model 935
Moisture Tester
Settings
The settings screen is accessible from the
main menu. Press SETTINGS to access the
settings screen.
This screen allows adjustment of the time,
tester language, UOM and averaging, and
installation of charts other than those pre-
installed by Shore.
NOTE: The Technical Assistance screen is used
by Shore to set up the tester prior to use.
Time
• To adjust the hour, use the plus and minus buttons to the left of the time display.
• To adjust the minute, use the plus and minus buttons to the right of the time
display.
• Press the return button to save the time setting.
Averaging
Use the scroll button to the left of the AVERAGE display to select the desired type
of averaging, and then press the return button to save the setting:
• NO: Results are based on a single test of the sample.
• YES: Results are based on an average of three tests of the sample.
• OVER 20%: Test results that are over 20% moisture will be based on an
average of three tests.
Test Weight UOM
Use the scroll button to the left of the UNIT TW display to select the desired test
weight UOM/setting, and then press the return button to save the setting:
• lb/bu: Pound per bushel
• lb/A bu: Pound per bushel ‘Avery’
• lb/W bu: Pound per bushel ‘Winchester’
• KIT: Measurement of the test weight will occur after the moisture test. Refer to
“Test Weight Measurement” on Page 15 to perform this test.
