4
Model 935
Moisture Tester
Main components
Dump cell
The grain sample is placed in the Dump Cell. The Dump Cell is a clear, plastic
cylinder that is equipped with a manually-operated butterfly valve. This design
ensures that the sample is always uniformly deposited into the Grain Cell.
Scale
The correct amount of grain that is required for each grain type is measured
by the scale when the grain sample is placed in the Dump Cell. This advanced
weighing system is used to obtain the most accurate moisture measurements.
NOTE: The built-in scale is active at all times.
Grain cell
Moisture content is measured in the Grain Cell. The Grain Cell is a metal cylinder
that is equipped with a temperature sensor. When the grain is deposited into the
Grain Cell, the temperature sensor is automatically activated.
To provide maximum precision, the Grain Cell is designed to evenly disperse the
sample. The patented cell-post system compensates for differences in volume,
weight and those caused by uneven grain release.
Tester Housing
The tester housing is designed to withstand the rigors of field use. The electronic
circuits are isolated from the interior of the cabinet.
The power switch, communication ports, power receptacle and printer output are
located at the rear of the housing.
Touchscreen Display
The LCD touchscreen display is located at the front of the housing and has a
screen resolution of 480x272 pixels. All user functions and measurement results
are available on the touchscreen display.
Power
Power Specifications:
• 100 to 240 VAC
• 50/60 Hz, 1.5 A
