9
Getting to Know Your Shoprider Powerchair
The Seat and Arm Assemblies
ANGLE
Pull up on the end of the armrests and they will flip
back up allowing easy transfer in and out of the
seat. Under the armrest, there is a bolt and lock nut
(1) that can be adjusted up or down to change the
angle of the armrest.
LENGTH (Adjustable Controller Bracket)
Located under the armrest controller bracket is a hand knob (2). By turning counter-
clockwise to release, the controller bracket can be extended and reset in position by re-
tightening the hand knob.
HEIGHT
The vertical square tube connected with the armrest can be reset to the desired position
by re-tightening the hand knob (3) for armrest height adjustment.
WIDTH
Beneath the rear of the seat there are two hand knobs, one on each side. Release the
hand knob and slide each arm assembly o ut ward. Re-tighte n t he hand k nob
when in the desired position.
(3)
(2)
(1)
Summary of Contents for 888WNLLHD
Page 21: ...21 Notes...
