6
Safety Instructions
Please use your Powerchair often and let it expand your horizons. The more
mobility your Powerchair brings, the happier you will be! But, with all things,
observing a few rules will ensure safe maneuvering. So please…
(1)
Do not
drive the Powerchair without reading this instruction manual.
(2)
D o n o t
u s e t h e j o y s t i c k i n a n e r r a t i c m a n n e r w h e n g o i n g u p o r d o w n a n incline.
(3)
Do not
carry passengers or exceed the maximum user weight (Table 2).
(4)
Do not
turn off the joystick controller by switching the On / Off Button when moving
at speed. This will bring the electromagnetic brakes on immediately and could cause
damage to the joystick controller.
(5)
Do not
drive over uneven or soft terrain.
(6)
Do not
mount or dismount the Powerchair unless the electromagnetic brakes are
engaged and the joystick controller is off.
(7)
Do not
operate the Powerchair if the unit is in freewheel mode.
(8)
Do not
use on the road, except when crossing between sidewalks.
(9)
Do not
sit on the Powerchair when in a vehicle, but transfer to a vehicle seat.
(10)
Do not
exceed any grade over 12 degrees (20%).
(11)
Always
stop fully before changing forward or reverse direction.
(12)
Always
engage a slow speed when going down gradients (move the joystick
slowly towards center position to reduce the speed).
(13)
Always
approach and climb over curbs at slow speed.
(14)
Always
use the safety belt.
(15)
Always
keep feet on the footrest while driving.
(16)
Always
make sure the batteries are fully charged before setting out on a journey.
(17)
Always
make sure the Allen bolt and the red tightening levers are tightened before driving
the Powerchair.
(18)
Always
charge the Powerchair in a well ventilated area.
(19) Whenever a center bolt of the wheel assembly has been loosened, please replace
with a specified new bolt from authorized providers and secure with a torque of 240
±
5 kg-cm together with Loc-tite 271 adhesive (or equivalent).
Summary of Contents for 888WNLLHD
Page 21: ...21 Notes...