11
ASSEMBLY
FIGURE 5
NOTE:
Make sure that stand part 1 (H) and stand part 2 (I)
are assembled in the proper orientation.
With assembled stand open, attach legs (J) to the stand using
(eight) M8 x 35mm carriage bolts (a) and (eight) M8 lock nuts
(e). Tighten lock nuts to secure legs to stand (FIGURE 3).
NOTE:
Do not over tighten lock nuts.
See finished assembly of stand in (FIGURE 4).
FIGURE 2
CORRECT
INCORRECT
FIGURE 3
H
I
J
e
a
H
I
A
I
H
B
NOTE:
Legs need to correspond to correct side of stand. The
feet of the front (A) are horizontal and the feet of the rear (B)
are vertical.
Saw as assembled (FIGURE 4A and 4B).
FIGURE 4A
FIGURE 4B
FRONT OF STAND
Horizontal
Feet
REAR OF STAND
Vertical
Feet
