Main menu setting
V
V
V
V
V
V
V
V
V
V
A
A
A
A
A
A
A
A
A
A
M
M
M
M
M
M
M
M
>2s
L3 main display
End setting, press OK to exit from
settings
V
A
In
=
63A
L3
Only L3 display when setting. L1 and L2 don’t display.
M
M
Overvoltage trip value setting V
Change the setting value by pressing
keys.
Undervoltage trip value setting V
Change the setting value by pressing
keys.
Reset/start delay setting S
Change the setting value by pressing
keys.
Overcurrent value setting A
Change the setting value by pressing
keys.
Overcurrent faults trip delay setting S
Change the setting value by pressing
keys.
Asymmetry ratio setting V
Change the setting value by pressing
keys.
Continuous overcurrent faults times
setting
Change the setting value by pressing
keys. OFF: turn off the function.
Phase sequence setting
Change the setting states by pressing
keys.
OFF: turn off the function;
ON: turn on the function;
Auto reset setting
Change the setting states by pressing
keys.
OFF: turn off the function;
ON: turn on the function;
Long press can increase or decrease repidly.
The relay will automatically exit from the menu and not save the
modified value if not pressing the keys for continuous 60s during
setting.
-2-
V
A
Operation mode setting
M
Change the setting states by pressing
keys.
:Synchronous mode;
:Asynchronous mode
:Synchronous mode; In this mode the
device works as a three phase voltage
protector with N,L1,L2,L3 as single
circuit
:Asynchronous mode : In this mode the
device works as three Individual single
phase protectors which can be
connected to three separate circuits.
Also the device can identify & stop/trip/
reset each of the three circuits
independently
i.e "N - L1" & "N - L2" & "N - L3"
( Modes explained in the bottom tab )
