Step 3
:
The chain tension is in good condition while the gap is about 5mm between chain to
lowest parts of swing arm. Lock all the nuts and screws, check the wheel alignment
and then re-attach the chain cover.
Adjusting brake
Step 1:
To adjust the brake tension, thread the brake lever
adjuster in or out 1/4 or 1/2 turn until the required
brake adjustments is attained.
Most of brake adjustments are complete at this step, if
the brake still need the further adjustment,
Step 2:
With 10mm open spanner, loose the brake cable and
adjust the brake caliper arm to make the cable
length
>30mm
from arm to the pillar.
Step 3:
With 8mm open spanner to loose the nut of friction
pad, and with 2.5mm allen wrench to adjust the inner
screw for friction pad.
Check
To check the wear of front and rear brake pads
A
, simply inspect the brakes calipers as shown
