-16-
W1772/W1773 37" Drum Sander
SE
T
U
P
7.
Remove the bolts, flat washers, and hex nuts from the
control panel support arm, as shown in
Figure.10
.
8.
Remove the right access panel.
9.
With assistance, lift the control panel into place and
secure it with the bolts, flat washers, and hex nuts
removed in
Step.7
.
10.
Reinstall the right access panel.
11.
Attach the brace from the control panel to the sander
as shown in
Figure.11
.
12.
Place the handwheel over the shaft shown in
Figure.
10
and tighten the set screw in the handwheel hub.
Figure.11..
Control panel brace.
Figure.10..
Control panel mounting bolts.
Figure.
12. Handwheel installed.
