-11-
SE
TU
P
Model W1764 (For Machines Mfg. Since 1/14)
The following is a description of the main components
shipped with the Model W1764. Lay the components out
to inventory them.
Note:
If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Box.Inventory.(Figures.24.&.25).
Qty
A.
Base ..........................................................1
B.
Arm Bracket ................................................1
C.
Power Feeder Unit ........................................1
D.
Arm ..........................................................1
E.
Base Mounting Template .................................1
F.
Elbow Clamp Assembly ...................................1
G.
Ball Joint Assembly ........................................1
H.
Hardware Bag
(Figure.25)
...............................1
—Cap Screw M10-1.5 x 25mm (Elbow Clamp) .........1
—Hex Bolt M10-1.5 x 50mm (Elbow Clamp) ...........3
—Lock Lever (Arm Bracket Clamp) .....................1
—Hex Nut M8-1.25mm (Arm Bracket Clamp) ..........1
—Flat Washer 8mm (Arm Bracket Clamp) ............1
—T-Handle and Pivot Bar (Ball Joint Assembly) .......1
—Hex Bolt M10-1.5 x 35mm (Base) .....................4
—Lock Washer 10mm (Base) .............................8
—Hex Nut M10-1.5mm (Base) ............................7
Inventory
Keep. machine. disconnected. from.
power.until.instructed.otherwise.
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Unpacking
SETUP
Figure.24.
Box inventory.
Figure.25.
Hardware inventory.
C
F
A
E
B
D
G
H
H
