Change position and height of the footbox:
The footbox height can be changed to keep the user’s feet flat and
fully supported on the footbox. Feet should not be dangling above
the footbox or sliding forwards off the footbox. You will need to use
a no 10 spanner to change the position of the footbox (adjust from
behind). The 2 nuts allow the footbox to slide up and down once
loosened.
The position of the footbox can also be changed (moved further in/
out) as required by lifting the buck off the base frame, holding both
sides of the footbox together, lifting out of position and replacing in
position required.
brake adjustment (2 bolts)
footbox hanger placement (holes)
Buck removed from base frame.
Attach and remove the posture tray:
The posture tray should always be fitted when the Madiba2Go Active
is in use. The tray arms are slotted into the brackets towards the back
of the buck of the Madiba2Go Active as shown. The tray has been
specially shaped to help the user to reach the wheels comfortably.
The central part of the posture tray can be slid forwards or backwards
as is necessary by adjusting underneath the tray with 10mm spanners
and a 4mm allen key. The height of the posture tray can be adjusted
at the back bracket (2 holes).
The user’s body should always be well supported but obviously the
user’s arms will be pushing the Madiba2Go Active so will only be
positioned on the tray when he/she is being pushed or doing activities
using the tray. Use the mark made by the seating therapist as a guide
to where the posture tray should be tightened.
