The Madiba2Go Active splits into parts and can then be easily stacked
for storage and transport. The seat (buck) can be slid off the base
frame. The headrest and posture tray will usually remain on the buck
(back system/seat) during transport. If necessary, remove the headrest
using the allen key and the footbox from the frame.
Steps to dismantle the Madiba2Go Active
1. Apply both brakes.
2. Remove posture tray from the brackets with both hands pulling
it out forwards together.
3. Remove the seat cushion from the seat.
4. Slide the seat forward by first lifting the silver metal buck release
tab behind the buck (see opposite picture). As you lift this tab, hold
onto the front edge of the buck seat (at the same time) and slide the
buck forwards and off the base frame.
How do I transport the Madiba2Go
Active?
Madiba2Go Active dismantled and ready for transport.
5. Fold frame by pulling on lanyard (cord) behind seat which releases
a pin; push handle upwards/forwards to fold.
6. Remove footbox if required.
7. Lift the frame and seat into the boot/van.
8. Remember to pack anything that has been taken off
e.g. seat cushion and posture tray.
silver tab (dismantling)
anti-tip adjustment
lanyard