Adjusting sagittal condylar path angle
6
Place the Occlusal Plate of anterior
bite record and mount the lower jaw.
The Condylar Ball of the articulator
should be detached from the
Sagittal Condylar Path Guide Plate.
6.1
Move both sides of the Guide Plates
and fasten the Lock Levers when
the Guide Plates and Condylar Ball
come in contact with each other.
To minimize deviation, use bite
registration and hold the lower cast
down to stabilize it.
6.2
Attaching Condylar Path
Downward Guide Plates
7
After adjusting the condylar path,
remove the Guide Plate and attach
the Twin Plates again.
Put the upper and lower jaws
together and close the Centric
Lock Levers.
Removing the Condylar Path
Adjusting Pedestal
8
Turn the articulator in to normal
position. Adjust the Incisal Pin
back to “0”position and remove
the Pedestal.
Condylar path adjustment is now
complete.
18
