Operating Procedures
Adjusting the sagittal condylar
path angle
• Move the lever upward to
release the lock.
• Move the lever downward to
close the lock.
1
Replacing Incisal Table
Take out the Incisal Table Screw and
replace the table with the desired
one (0º, 10º, option: 5º, 15º).
2
Twin-Plate mechanism
• Loosen the Guide Plate
Screw to detach the Condylar
Path Downward Guide Plate.
(Twin Plates)
• Mounting the Twin Plates
Insert the little projection (on
the back of the plate) into the
corresponding slot at the upper
jaw frame and tighten the screw.
3
6
