Shodex IC SI-36 4D Operation Manual Download Page 6

ver.200603E

 

SHOWA DENKO K.K. (https://www.shodex.com/)

 

10. Warranty (Ver. 4COLUMN) 

 

(1) Showa Denko K. K. warrants that the ShodexTM product, at the time of delivery to the user, will conform to 

the specification of the attached CERTIFICATE OF ANALYSIS, if the Shodex product is used in accordance 

with the attached operating manual. The foregoing warranty is exclusive and is in lieu of all other warranties 

with respect to the Shodex product, whether written, oral, implied, statutory or otherwise. No warranties by 

Showa Denko K. K. are implied or otherwise created, including, but not limited to, the warranty of merchantability 

and fitness for particular purposes.   

 

(2) Any claim of inconformity to the specification must be notified to Showa Denko K.K. within ten (10) days after 

delivery to the user. User’s exclusive remedy and Showa Denko K.K.‘s exclusive liability for such claim are 

limited to the replacement of the Shodex product in question. In no event is Showa Denko K.K. liable for any 

indirect, incidental or consequential damage arising out of in connection with the Shodex product, whether or 

not such damage is allegedly based on breach of warranty, negligence or otherwise.   

 

(3) No warranty is made in any of the following cases:   

3-1 If the Shodex product is not used in accordance with the operating manual   

3-2 If the Shodex product is remodeled by anyone other than person or firm designated by Showa Denko K.K.   

3-3 If the Shodex product is disposed of   

3-4 If the Shodex product is resold by the user without giving prior written notice to Showa Denko K.K.   

3-5 If the performance of the Shodex product is not conform to the specification of the attached CERTIFICATE 

OF ANALYSIS due to any of the reasons below:   

a. Computer virus   

b. Impurities contained in the sample, reagent, gas air or cooling water provided by the user   

c. Breakdown or malfunction of equipment, apparatus or component used in combination with the Shodex   

product   

d. Force majeure such as fire, earthquake, flood, other natural disaster, crime, riot, act of terrorism, war or 

radioactive contamination   

 

(4) In no event is Showa Denko K.K. liable for   

4-1 the results of analysis or preparations using the Shodex product or any portion of the same, including, but 

not limited to, the reliability, accuracy, efficacy and safety of said results, and   

4-2 the occupational hazard in the use of the Shodex product, whether or not such use is made in accordance 

with the attached Conditions for use.   

 

(5) The Shodex product is for laboratory use only. It must not be used for clinical diagnosis. Showa Denko K.K. 

is not liable for any use of the Shodex product except laboratory use. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Following names are trademarks or registered trademarks of SHOWA DENKO K.K. 

Shodex, AFpak, Asahipak, AXpak, CLNpak, CXpak, HILICpak, MSpak, ODP, OHpak,   

ORpak, RSpak, SUGAR, USPpak. 

 

Products described in the operation manual are not intended for medical use or medical applications.

 

Summary of Contents for IC SI-36 4D







Reviews: