8
Blue
Spacer
10in
251mm
Rear Mount
No
Spacer
Front Mount
8in
201mm
Red
Spacer
Mid Mount
9in
235mm
8-inch Height Configuration
9-inch Height Configuration
10-inch Height Configuration
CHANGING SUSPENSION MODULE HEIGHT
• Once you set the height of your
seat on your boat, if required, the
height of your suspension module
position can be changed by 1-inch
(25mm) to Mid Mount or 2-inch
(50mm) to Rear Mount.
• Remove the bolt from the front
mount and place it into either the
Mid mount or Rear Mount position.
• For the Mid Mount setting,
install the smaller, red spacer to
the top module plate using the
supplied fastener.
• For the Rear Mount setting,
install the larger, blue spacer to
the top module plate using the
supplied fastener.
The SHOCKWAVE S5 comes with the shock absorber in the front mount position
which is the lowest height configuration.
If a higher installation height is required you will need to install one of the two
spacers provided. These are required to properly change the height of your
suspension module. Use the procedure below to change the suspension
module height.
Do not change the suspension module height without using the
appropriate spacer.
