
14
Observations
• Be careful not to touch electrodes
5
Tighten the nozzle using the nozzle wrench
until the nozzle is fixed.
6
Put the burner unit back with three nuts re-
moved.
7
Put the red wire back.
8
Put the burner cover back with two screws
removed.
3
Unscrew three nuts and pull out the burner
unit.
4
Replace with a new nozzle by using the
provided nozzle wrench.
Nozzle
Nozzle Wrench
2
Disconnect the red wire of overheat protec-
tion at the back of the burner base.
6
How to store the heater
CAUTION
• If the heater is stored or not used for an extended period of time, empty the fuel tank to
help prevent fuel leakage and other possible fire dangers.
When you store the heater, please disconnect the power plug from the extension cord and/or the
AC outlet and store the heater indoors where it is less humid.
Observations
• Do not store the fuel over summer months for use during next heater season. Using old fuel could damage the heater.
■
Replacing a nozzle
1
Unscrew two screws of the burner cover
and take the burner cover off.
■
Replacing a fuse
1
Unscrew two screws of burner cover and re-
move the burner cover.
2
Unscrew the screw cap of fuse holder and
take out the fuse.
3
Replace with a new one.
4
Put the screw cap back into fuse holder.
5
Put the burner cover back with two screws
removed.
Open a screw cap and
take out a fuse.
Check whether the fuse
is blown out.
Fuse
VAL6_MPX_Multi.indb 14
14/04/01 10:52