background image

i

Table of Contents

Chapter 1  Precautions and Preparation .............................................1

Precautions........................................................................................... 1
Receiving.............................................................................................. 1
Unpacking ............................................................................................ 1
Checking the system ............................................................................. 2

Chapter 2  Antenna Installation..........................................................3

Precautions........................................................................................... 3
Installing the radiators........................................................................... 3

Figure 1  Baymount detail ................................................................ 3
Figure 2  Radiator installation, exploded view .................................... 4
Figure 3  Flange bolt tightening sequence ......................................... 5
Table 1  Torque Specifications, Flange Bolts ...................................... 5

Installation of radomes (if applicable) ..................................................... 5

Figure 4  Radome installation ........................................................... 6
Figure 5  Ground strap installation .................................................... 7

Installing the feedline mounts ................................................................ 7

Figure 6  Common feedline mount configurations .............................. 8

Installing the feedline sections ............................................................... 9

Figure 7  Feedline flange detail......................................................... 9

Installing the transformer .................................................................... 10

Figure 8  Transformer installation, top view..................................... 10

Chapter 3  De-Icer Installation (if applicable)..................................11

Precautions......................................................................................... 11
De-icer system description ................................................................... 11

 Dual-setting thermostat ................................................................. 11
 Electric power ............................................................................... 11

Figure 9  De-Icer electrical schematic diagram................................. 12
Table 2  De-Icer specifications ....................................................... 13

De-icer installation .............................................................................. 13

 Installing the de-icer harness ......................................................... 13

Figure 10  Bay junction box installation ........................................... 14

 Installing the thermostat (if applicable)........................................... 14

Table 3  Thermostat readings......................................................... 15

Chapter 4  Startup and Operation .....................................................17

Precautions......................................................................................... 17
Pressurization ..................................................................................... 17

 Test for leaks ................................................................................ 17
 Purge the system .......................................................................... 17

Figure 11  Pressurized gas schematic.............................................. 18
Table 4  Volume of coax per 1000 feet of length.............................. 19

 Leave the system pressurized......................................................... 19

Summary of Contents for 6814



































Reviews: