Shively Labs 6814 Page 2 Instruction Manual Download

Page: 2 / 34

Congratulations!

Thank you for purchasing one of the finest FM broadcast antennas on the
market today. The Shively Labs Model

6814

is widely recognized as the top-

of-the-line in its class for its superior performance and durability.
Your purchase is backed by the best technical support in the industry. Shively

is a leading manufacturer in the broadcast industry, providing an extensive

range of antennas, transmission line and components. Our technical staff has

a wealth of experience in the broadcast industry and is standing by to serve

you in any way.
This manual is intended to give you a good basic understanding of your

antenna: its proper and safe installation, startup, and operation, and trouble-

shooting and maintenance information to keep it working satisfactorily for

years to come.

Please have everyone involved with the antenna read this

manual carefully, and keep it handy for future reference.

Meanwhile, please feel free to contact your sales representative at Shively

Labs at any time if you need information or help. Call or write:

Publication No. im-6814 (150601)

Summary of Contents for 6814



































Search results

Summary of Contents for 6814

Reviews:

Related manuals for 6814

Brands by name

Popular brands

Shively Labs 6814, Instruction Manual

Search results

Summary of Contents for 6814

Reviews:

Related manuals for 6814

Brands by name

Popular brands