IEEE802.11b,IEEE802.11g,IEEE802.11n
）
If the radio equipment uses the above listed 2.4GHz band channels, you can
use all the bandwidth and avoid channels used by radio-frequency
identification readers. It employs DSSS modulation method and OFDM
modulation method, and the interference range is 40m.
This unit uses the same frequency band as other industrial, scientific, and
medical equipment including a microwave oven, as well as radio-frequency
identification readers (radio stations requiring the license) and specified low
power radio frequency station (requiring no license) used in factories and
manufacturing lines.
1)
Before using this unit, be sure there is no specified low power radio
frequency station or radio-frequency identification reader in use
nearby.
2) If this unit interferes with a radio-frequency identification reader,
immediately stop data transmission and contact Support Center for
further instructions.
Depending on your wireless LAN environment including the structure/material
of the building, obstacles, software and signal transmission, the speed of the
connection will vary. Note the connection may also slow down or be
interrupted.
Check with the airline before carrying this unit on an airplane.
◆
About the 5GHz band channels
This unit can use the 5GHz band. It uses the following channels. Note, in
Japan (Radio Act) and some countries, laws prohibit use of 5.2GHz and
5.3GHz bands outdoor.
•
W52 (5.2GHz band/36,40,44,48ch)
•
W53 (5.3GHz band/52,56,60,64ch)
•
W56 (5.6GHz band/100,104,108,112,116,120,124,128,132,136,140ch)
Use of Wi-Fi is subject to local laws and regulations in your country/region.
