background image

Getting

 Started….. 

GB 

IE 

Base and Warranty 

The following are also excluded: 

 



Damage resulting from poor assembly.  



Poor treatment application. 



Poor care and maintenance. 



Changes to the design.  



Misuse.  



General wear and tear. 

Warranty... 

 

10 Year anti-rot warranty subject to the following:

 

 



The building must be raised so it is not in contact with any water        
retaining base surface (for example grass). 

 



This can be achieved using a timber, concrete or slab base. 

 



When using a concrete or slab base use damp proofing strips            
under the bearers. 

 



The building must have been completely treated and sealed               
immediately prior to assembly.  

 



The building must have been re-treated and re-sealed annually. 

 

NOTE

: Wood is a natural product, and therefore the following are  

excluded from the warranty: 

 

- Colour change. 

 

- Warping. 

 

- Splitting. 

Preparation

 

of base... 

 

We recommend that the base onto which your building will stand should be at least 

75mm larger in each direction than the total floor size of the building.  

 

Haddon without Verandah: 



Actual floor area of the building: 

2048mm x 1550mm  



Total height clearance:  

2100mm 

(same for both buildings)

 



Roof size:  

2173mm x 1834mm  

Houghton inc Verandah Sizes: 



Actual floor area of the building: 

2048mm x 2154mm 



Roof Size: 

2166mm x 2225mm 

 

The chosen position in your garden for your building should be excavated to a depth 

of 75mm to allow a base of sand, onto which paving slabs can be evenly laid.  

You may also use an adjustable timber base or a concrete base. Whatever base you 

decide upon IT MUST BE LEVEL AND FIRM. 

04

 

Summary of Contents for 7x5 Haddon 2022

























Reviews: