GB-IE
Drill one
Plain Panel 990 (A0004)
as below. Make sure the bottom hole is inline with the floor
bearer. Drill one
Plain Panel 560 (A0005)
as below. Place the 560 into the corner, so that the
cladding overlaps the floor. Push the 990 panel up to it and fix with 3x
60mm Screws
(A0035).
14
03
5 mm
NOTE
Some holes
drilled for
later use
Plain Panel 560
(A0005)x01
60mm Screws
(A0035)x03
In line with floor bearers
DO NOT
FIX WALLS TO
FLOOR
UNTIL ASKED
Plain Panel 990
(A0004)x01
