Shinybow USA SB-6320R Instruction Manual Download Page 3

Page: 3 / 12

CONTENTS

INTRODUCTION & PACKAGE CONTENTS ................... 1
FEATURES & SPECIFICATIONS .................................... 2
TYPICAL HOOKUP AND OPERATION ............................ 3

INTRODUCTION

Congratulations on your purchase of one of the most innovative
HDBaseT™ Receivers or HDBaseT™ Transmitters on the market
today. The SB-6320R HDBaseT™ receiver can receive HDMI
signals from the SB-6320T HDBaseT™ Transmitter for lengths
up to 328 ft/100M. The SB-6320R uses HDBaseT™ to receive
the HDMI, IR, RS-232 & Ethernet signals from the HDBaseT™
Transmitter via CAT6/6a/7 category cable and uses RJ-45
connectors. The SB-6320T uses HDBaseT™ to transmit the
HDMI, IR, RS-232 & Ethernet signals to the HDBaseT™ Receiver
via CAT6/6a/7 category cable and uses RJ-45 connectors. This
product provides higher full HD resolutions of 480i/p, 720p,
1080i/p sw I/O quality that is identical to the HD source quality
signals. Can extend the HDMI signals up to 328 ft/100M with high
resolution quality to full HD series displays.

PACKAGE CONTENTS

Check that you have the following components;

•

SB-6320R HDMI CATx Receiver or SB-6320T Transmitter

•

SB-100C IR Receiver w/ attached cable

•

SB-101C IR Emitter w/ attached cable

•

SB-100 IR Receiver w/ assembly plug

•

SB-101 IR Emitter w/ assembly plug

•

Mounting tabs w/ screws

•

North American Power Cord

•

User’s Guide

• Power Supply: DC12V, 2A

HDMI CAT6 EXTENDER Series

Thank you for purchasing the SB-6320R or SB-6320T HDMI CAT6/6a extender. You will find this unit easy to install and
highly reliable but it is essential that you read this manual thoroughly before attempting to use converter.

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this

equipment:
• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts
inside the unit.

• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.

We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.

We reserve the right to make improvements to this document
and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated

into any language or computer file, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise — without express written permission and consent

Version 2.0 AUG 2015

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.

CONFORMANCE TEST REPORT

FOR

EN 61000-6-1 / EN 61000-6-3

REPORT NUMBER: 09-07-MAS-282-18-R

FOR