Shinybow USA SB-5645LCM-CT Instruction Manual Download Page 15

13

EDID FUNCTION

NOTE :

 The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.

For example; When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and 

the EDID data cannot change.

Please select new learning destination to sources or change to one of the embedded EDID modes when you want to remove the 

learning EDID memory from EPRPM.

EDID FUNCTION : 8X EMBEDDED EDID MODES

EDID function : 8x Embedded EDID Modes

Mode 1. FSS

 (Fast Speed Start)

Automatic capture of the most suitable EDID from Destination to Source.

Mode 2. H24-3D

 (1080p-24 bits)

Audio Support : PCM 2CH

Mode 3. H24-3D-M

 (1080p-24bits)

Audio Support :

MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS 

5.1CH, PCM 7.1CH, Dolby D 7.1CH, DTS-HD 7.1CH

Mode 4. H36

 (1080p-36 bits)

Audio Support : PCM 2CH

Mode 5. H36-M

 (1080p-36 bits)

Audio Support :

MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS 

5.1CH, PCM 7.1CH, Dolby D 7.1CH, DTS-HD 7.1CH

Mode 6. 1280x1024-60Hz 

(DVI-D)

DVI Support : DVI-D 1280x1024 60Hz

Mode 7. 1920x1200-60Hz

 (DVI-D)

DVI Support : DVI-D 1920 x 1200 60Hz

Mode 8. AUTO

 <Default>

All Outputs will be set to the highest common resolution of all connected 

display devices.

Summary of Contents for SB-5645LCM-CT

























Reviews: