12
EDID FUNCTION
EDID FUNCTION SETUP
EDID Setup
To change the EDID setup
Step 1 . Press the EDID button
The display will show the currently selected EDID mode
Step 2 . Press SOURCE #1 or #2 button row
The button will flash blue and the display will show the current Embedded
EDID Status.
Step 3 . Press the ENTER button
To set EDID mode. The switcher will return to operation mode.
Operation will abort if no keys are pressed within 5 seconds.
Embedded EDID modes
Total 8 EDID Modes
Embedded EDID setup
Press
EDID > SOURCE > ENTER
SOURCE #1 or SOURCE #2
To select Embedded EDID mode or LEARNING mode.
Press EDID button : The LCM will show the current EDID status.
Repeatedly depressing the source 1 button will cycle up thru the options.
Repeatedly depressing the source 2 button will cycle down thru the options.
Embedded EDID :
Mode 1 : FSS Mode 5 : H36M-3D
Mode 2 : H24-3D Mode 6 : DVI 1280x1024-60Hz
Mode 3 : H24M-3D Mode 7 : DVI 1920x1200-60Hz
Mode 4 : H36-3D Mode 8 : AUTO
EDID FUNCTION FOR HDMI MATRIX SWITCHER
RESET
EDID Return To Factory default
How to RESET EDID mode
Press
EDID > SOURCE > ENTER
To RESET the FACTORY DEFAULT (1080p-2CH).
Press EDID button : The LCM will show the current EDID status.
Press RECALL button : The LCM will show the RESET EDID.
Press ENTER to confirm entries.
The EDID will return to FSS mode and resolution 1080p-2CH.
LEARNING EDID
Learning EDID from Destination to Source
Learning EDID setup
Press
EDID > DESTINATION > SOURCE > ENTER
Press
EDID > DESTINATION > DESTINATION > SOURCE
> ENTER
Press : EDID > Switcher will
LEARN
destination HDMI EDID and pass the
selected source. Learning EDID setup for HDMI
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned
Press: EDID > DESTINATION #1 >
Switcher will
LEARN
destination CATx EDID and pass the selected source.
Learning EDID setup for CATx
Key Press Sequence:
EDID > DESTINATION # > DESTINATION # >
SOURCE # > ENTER
Again, Press the same DESTINATION # to learn CATx EDID The EDID for
CATx has been learned