EDID MULTIPLE LEARNING MODE-1
SINGLE LEARNING EDID #1
Learning EDID from Destination to Source
Single Learning EDID mode-#1 setup
Press:
EDID > DESTINATION > SOURCE > ENTER
Press
EDID > DESTINATION
Button: The LCM will be show LEARNING.
Switcher will LEARN destination HDMI EDID and pass the selected source.
Learning EDID setup for HDMI
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned
Single Learning EDID mode-#1 setup
Press:
EDID > DESTINATION > DESTINATION >
SOURCE > ENTER
Switcher will LEARN destination HDBaseT
™
CATx EDID and pass the selected
source.
Learning EDID setup for HDBaseT
™
CATx
Key Press Sequence:
EDID > DESTINATION # > DESTINATION # > SOURCE # > ENTER
Again, Press the same DESTINATION # to learn HDBaseT
™
CATx EDID
The EDID for HDBaseT
™
CATx has been learned
NOTE : The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For example: When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the
EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when
you want to remove the learning EDID memory from EPROM.
EDID MULTIPLE LEARNING MODE-2
The MULTIPLE LEARNING MODE-2 feature is part of a firmware update released after JUNE 2014. If you do not see the MULTIPLE
LEARNING MODE-2 feature then you do not have the latest firmware. You should contact your place of purchase for availability of a firmware
update. Not all devices are capable of a firmware update. Firmware update requires a PC with OS Windows XP or WIN7 and an RS-232
port (or USB to RS-232). Customer is responsible for implementing a firmware update and accepts all risks. Others limitations may apply.
LEARNING EDID #2
Passing EDID from Destination to Source
Multiple Learning mode #2 EDID setup
Key Press Sequence:
EDID > OFF > DESTINATION #1 THRU #4
> ENTER
The EDID for HDMI has been Learned from the Destination port to the Source port.
1. Press
EDID
button
The LCM will show the current EDID
status.
2. Press
OFF
button
The LCM will show the current EDID
LEARN status.
3. Press
DESTINATION
button
Press
DESTINATION (#1 THRu #4)
Switcher will LEARNING destination
HDMI EDID and pass to the selected
source.
Switcher will Enable or Disable HDMI
EDID for the selected source.
4. Press
ENTER
button
Press
ENTER
to confirm changes. The
LCM will return to the default screen
showing selected matrix routing status.
NOTE: When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and
the EDID data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination
to source or Disable the LEARNING
22
EDID FUNCTION