ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0
For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.
Example of the commanded string to select Inputs:
FuNCTION
COMMAND
VARIABLES
Select source
Source xxx;
xxx = Input Channel
(001=Source1, 002=Source2.etc)
COMMAND
EXAMPLE RESPONSE
DESCRIPTION
Source 001;
Source 001#ok;
Select source number 1
RS-232 Configuration
RS-232 cable is a straight thru cable and not null-modem
Definition Pin
Pin Definition
1
1
DCD
TX
2
2
RX
RX
3
3
TX
4
4
DTR
GND
5
5
GND
6
6
DSR
7
7
RTS
8
8
CTS
9
9
RI
RS-232
RS-232 PROTOCOL COMMANDS (RS-232 CONTROL DRIVER V2.0)
The ShinybowUSA switcher can be controlled via the TCP/IP serial control port to allow for interfacing to a PC, or similar third party control
system.
The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When the unit
recognizes a complete command it will perform the requested action - there is no delimiter character required.
18
ETHERNET & RS-232 SERIAL INTERFACE
PC
Shinybow
Device