Learning EDID Single to Single
Example : Learn Destination #8 EDID To Source #5.
Step 1.
Press
EDID
button
The button will flash blue and the display will show the current
Embedded EDID
Status.
Step 2.
Press the
DESTINATION #4
button row Copy the Destination #4 Display EDID.
Step 3.
Press the
SOuRCE #3
button row
Learning the Destination #4 EDID To Source # 3.
Step 4.
Press
ENTER
button
To confirm entries.
Learning EDID Single to Multiple
Learning destination EDID link to the majority Sources
Step 1.
Press
EDID
button
The button will flash blue and the display will show the current
Embedded EDID
Status.
Step 2.
Press the
DESTINATIONS #1~4
Copy any 1~4 Destinations EDID.
Step 3.
Press the
SOuRCE #1, #2,~#4
button
row
Learning the Destination EDID link to source #1,#2,~#4.
Step 4.
Press
ENTER
button
To confirm entries.
Learning EDID Single to ALL
Learning destination EDID link to All Sources
Step 1.
Press
EDID
button
The button will flash blue and the display will show the current
Embedded EDID
Status.
Step 2.
Press destination button
1 THRu 4
Learning anyone 1~4 Destination EDID to all sources..
Step 3.
Press
ALL
button
Learning selected destination EDID to all sources.
Step 4.
Press
ENTER
button
To confirm entries.
EDID status
To view the current EDID status.
Step 1.
Press
EDID
button
The button will flash blue and the display will show the current
Embedded EDID
Status.
Step 2.
Press
EDID
button
To exit.
How to setup FSS
®
Function
Fast speed start
®
Step 1.
Press the
DESTINATION #1~4
button row
Then Press the
SOuRCE #1~4
button row To setup and Install all devices.
Step 2.
Press
EDID
button
Select a optimum status of
Embedded EDID
mode.
Step 3.
Press
ENTER
button
To conform entries.
Step 4.
Press
EDID
button
To select the EDID
FSS
®
mode.
Step 5.
Press
ENTER
button
To conform entries.
SINGLE LEARNING #1 definition
Single Learning EDID from Destination to Source
1. Switcher will LEARN destination EDID and pass the selected source.
2. Learning EDID setup for HDBaseT
™
CATx Key Press Sequence:
EDID > DESTINATION # > DESTINATION # > SOURCE # > ENTER
Again, Press
the same DESTINATION # to learn HDBaseT
™
CATx EDID The EDID for HDBaseT
™
CATx has been learned
3. To set up learning between a single destination and Multiple sources: Press
EDID
button > Press
DESTINATION 1 THRu 4
>
Press the majority
SOuRCES 1 THRu 4
> Press
ENTER
. Switcher will learn single destination EDID to many source devices.
4. How to Learning single destinations with all sources. Press
EDID
button > Press
ALL
button > Press
ENTER
to confirm.
MULTIPLE LEARNING #2 definition
Multiple Learning EDID from Destination to Source
1. Switcher will multiple LEARN destination EDID and pass the selected source.
2. To set up multiple learning between a single destination and single source: Press
EDID
button > Press
OFF
button > Press
DESTINATION 1 THRu 4
> Press
ENTER
to confirm. Switcher will learn destination EDID to source device.
3. When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and the EDID data
will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination to source or Disable the
LEARNING.
21
EDID FUNCTION