REAR PANEL - SWITCH CONTROLS
1
REAR PANEL
3
2
1
3
2
RS 232 CONNECTION
RS 232 control port to allow for interfacing to a PC
Such as a computer or touch panel control, to the switcher
via this DB-9pin Female connector for serial RS-232 control.
,
IR EXTENDER CONTROL
Support one of IR Extender
Extend distance maximum 300Meters / ~984 feet
When you plug the External IR extender into the switcher,
the front panel IR receiver remain active.
Remote port :
D-SUB-9pin Female connector
IR Extender Jack:
Female Jack - inner OD O 3.5 mm
4
ETHERNET CONNECTION
ETHERNET control port to allow for TCP/IP interfacing to a PC
Such as a computer or touch panel control (not a web-browser),
to the switcher via this RJ-45 Female connector to control switcher.
,
Remote port : Control the switcher
RJ-45 Female connector
SW IR in
RS232
Ethernet
POWER INLET
Ethernet Port:
Note: the Ethernet port and RS-232 port cannot be used
simultaneously. Any connection to the Ethernet port will
disable serial commands send to the RS-232 port.
4
Switch Control
Switch Control
Switch Control
PAGE 14
SB-5645AK INSTRUCTION & OPERATION MANUAL
The Switcher is fitted with a DC power plug input connector.
Ensure that the used is of an approved type and is of sufficient
current carrying connector capacity with the correct voltage and connector
polarity. 12Volt DC power supply 3A Max (Center pin positive).
Power Jack:
DC Jack - inner OD O 2.1mm (+ )
Outside OD O 5.5mm (GND)
Power input - 12VDC, 3A
INPUT
IR EXT. In
DC 12V
RS-232
ETHERNET
SPDIF/ARC
INPUT
1
AUDIO
4x4 HDMI Matrix Switch with Auxiliary Audio I/O
HDMI-DVI
HDMI-DVI
INPUT
2
AUDIO
HDMI-DVI
INPUT
3
AUDIO
HDMI-DVI
INPUT
4
AUDIO
HDMI-DVI
1
OUTPUT
SPDIF/ARC
HDMI-DVI
2
OUTPUT
SPDIF/ARC
HDMI-DVI
3
OUTPUT
SPDIF/ARC
HDMI-DVI
4
OUTPUT
Switch Control
This port Also for Firmware update.
