Shintaro SH-HDST01, User Manual

Page: 13 / 32

13
Channel Scan
Select “Channel Scan”, press the “OK” 1.
button to enter the Channel Scan menu
Press cursor button to set Scan mode,
2.
Scan Band, Channel No., Frequency and
Bandwidth, then highlight “Search”, press
“OK” button to start channel scan
Aerial Adjustment
Select the “Tuner Power”, press” OK” to 1.
enter the Aerial Adjustment.
Press the cursor button to set the desired
2.
setting. When “Tuner Power” is selected
“On”, the STB will provide 5V power to
antenna. It will not provide power when
“Off” is selected.
LCN
If LCN (Logical Channel Number) Select function is activated, you can’t change
the original number of TV channels by scanning. You can activate/deactivate
the LCN function by setting the “LCN Mode” to on/off.
Channel Scan
Scan Mode
Scan Band
Ch No.
Search
Frequency
Bandwidth
By channel
UHF
CH37(666000KHz)
666000KHz
8MHz
Signal Intens ity
Signal Quality
81%
97%
Aerial Adjus tment
Ch No.
Tuner Power
CH37(666000KHz)
Off
Signal Intens ity
Signal Quality
81%
97%
Channel Scan mode:
By channel
By frequency