SHINPO SPRW, Operation Manual

Page: 8 / 20

SPRW_ENGLISH _101
7
Preparation before use
◆ Setting up parts (Refer to P.1,2)
1. Place the Filter Set on the bottom of the Outer Casing.
2. Mount the Inner Casing onto the Outer Casing.
3. Mount the Burner Body onto the Inner Casing.
Note:
▼
Make sure that the two projections on the backside of the Burner Body go into the corresponding holes
in the Inner Casing.
▼
Make sure that the Burner Body is sitting squarely and level on the Inner Casing.
▼
If the Burner is sitting off to the side or tilted, incomplete combustion may occur.
4. Mount the Burner Head onto the Burner Body.
▼
Rotate the Burner Head a couple of times and make sure the Burner Head is sitting squarely and level.
▼
If the Burner Head is sitting off to side or tilted, incomplete combustion may occur.
5. Place the Drain Pan on the bottom of the Inner Casing.
Note:
▼
The Drain Pan is designed to sit on the top edge of the Inner Casing.
▼
Clean the Drain Pan if the contact surface of the Drain Pan or Inner Casing is soiled with dust or other
substances.
▼
If the Drain Pan is not sitting squarely, or the contact surfaces are not clean, incomplete combustion
may occur.
Off to Side
／
Tilted
Burner Body
Burner Head