background image

SPRW_ENGLISH _101 

9

 

Operating Instructions(Slim Control Type) 

Before you turn on the power and open the Gas Shutoff, make sure the Burner Control Knob 
is at Off position and that every direction in the “Preparation before use” section of this 
manual has been precisely followed. Also make sure that the Exhaust Fan is operating 
normally. 

 

Ignition 

 

Slowly slide the Burner Control 
Knob all the way to Ignition 
position. 

 

When you try to ignite for the first time, you 

may have some difficulty due to the air 
remaining in the gas pipe. 

 

Remove the air completely and try again. 

 

The Igniter makes a clicking sound and ignite gas. 
Make sure gas is burning before you release the 
knob. 

 

If the Burner fails to ignite, slide the Knob back to Off position. 

 

Wait for a while and try again.

 

 

Make sure you wait long enough to disperse the gas within the 

appliance to avoid an explosive ignition. 

 

 

Adjusting flame force 

The flame strength can be adjusted in 3-step of High, Medium and Low by controlling the knob. 

 

HIGH

MEDIUM 

▼ 

Slowly shift the knob in left(in direction of STOP), 
and it will stop at position of MEDIUM making a 
clicking sound. 

 
 

MEDIUM

LOW 

▼ 

Further shift the knob in left slowly, and it will stop 

at position of LOW making a clicking sound 

 

①②

LOW/MEDIUM

HIGH 

▼ 

Slowly slide the Burner Control Knob all the way 
to IGNITION position. 

▼ 

Release your hands, and it will stop at position of 

HIGH. 

 

①②③

LOW

MEDIUM 

▼ 

Slowly slide the Burner Control Knob all the way 
to IGNITION position. 

▼ 

Shift the Knob in left, and it will stop at position of 
HIGH and MEDIUM making a clicking sound. 

 

Summary of Contents for SPRW





















Reviews: