Shinko SE1AA, Instruction Manual, Page: 19 / 56

- 19 -
Output specifications are shown below.
Open collector Control capacity: 0.1 A 24 V DC
Alarm output wiring example
(Fig. 4.3.2-3)
4.3.3 Input Wiring
Connection terminals differ depending on the input specifications.
Refer to (Fig. 4.2-1) to (Fig. 4.2-8).
SE2AA :
For CH1, use terminals 1 (+), 2 (-) for input wiring and shunt resistor connection.
For CH2, use terminals 5 (+), 6 (-) for input wiring and shunt resistor connection.
(See Table 4.3.3-1.)
SE1AA :
Use terminals 1 (+), 2 (-) for input wiring and shunt resistor connection.
(See Table 4.3.3-1.)
(Table 4.3.3-1)
Shunt Resistor
Input
Model
(for Y terminal)
Model
(for Ring terminal)
Specification
4 to 20 mA DC
0 to 20 mA DC
0 to 16 mA DC
RES-S06-050 RES-S01-050 50 0.1%
2 to 10 mA DC
0 to 10 mA DC
RES-S06-100 RES-S01-100 100 0.1%
1 to 5 mA DC RES-S06-200 RES-S01-200 200 0.1%
0 to 1 mA DC RES-S06-01K RES-S01-01K 1 k 0.1%
Alarm unit Wire harness
SE A Top
DC power
+ -
SE A Interior