Shinko SAAR, Instruction Manual

Page: 18 / 20

18
SAVR (DC voltage ratio transmitter)
Input Input resistance
Allowable signal
source resistance
0 to 10mV DC 20 or less
-10 to 10mV DC 40 or less
0 to 50mV DC
0 to 60mV DC
0 to 100mV DC
200 or less
0 to 1V DC 2k or less
0 to 5V DC
1 to 5V DC
0 to 10V DC
1M
1k or less
Output specifications
DC current
Output
Allowable load
resistance
Zero adjustment
range
Span adjustment
range
4 to 20mA DC 700 or less -5 to 5% 95 to 105%
0 to 20mA DC 700 or less 0 to 5% 95 to 105%
0 to 12mA DC 1.2k or less 0 to 5% 95 to 105%
0 to 10mA DC 1.2k or less 0 to 5% 95 to 105%
1 to 5mA DC 2.4k or less -5 to 5% 95 to 105%
DC voltage
Output
Allowable load
resistance
Zero adjustment
range
Span adjustment
range
0 to 1V DC 100 or more 0 to 5% 95 to 105%
0 to 5V DC 500 or more 0 to 5% 95 to 105%
1 to 5V DC 500 or more -5 to 5% 95 to 105%
0 to 10V DC 1k or more 0 to 5% 95 to 105%
When the output range lower limit is zero, (even if zero adjustment results
in a negative value), the output value will not be negative.
Performance
Accuracy Input : Within 0.1% (If Ratio is set to 1.00 times and bias is set to 0%)
Output: Within 0.1% (If Ratio is set to 1.00 times and bias is set to 0%)
Display accuracy Within Input accuracy 1 digit
Response time 0.5 seconds (typical) (0 90%)
Ratio setting 0.10 to 4.00 times
Bias setting -100 to 100%
Computing equation See Section 8.2.4. (p.17)
Temperature coefficient 0.015 %/
Insulation resistance Input – Output – Power: 10M or more, at 500V DC
Dielectric strength Input – Output – Power: 2.0kV AC for 1 minute
General structure
Case Flame-resistant resin, Color: Light gray
Front panel Membrane sheet
Setting Setting by the front keypad
Display, indicator Input display : 7 segments Red LED display 4 digits
Character size: 7.4 x 4.0mm (H x W)
Output display : 7 segments Green LED display 4 digits
Character size: 7.4 x 4.0mm (H x W)
Power indicator: Green LED