13
Display
Name, Function, Setting range
Default value
Display selection
Input/Output indication
IN
OUT
Selects an indication type on the display.
Selection item:
: Input/Output indication
: Input indication
: Output indication
: No indication (Only the power indicator is lit.)
Indication time
00.00 (Continuous)
IN
OUT
Sets the indication time of the display after the final key operation.
Not available if No indication (Only the power indicator is lit) is selected
during Display selection
After the indication time has elapsed, the displays go off (Only the power
indicator is lit.).
If power is turned on again, or if any of the keys
,
,
and the
Sub-mode key is pressed while displays are unlit, the displays will light again.
Setting range:
00.00: Continuous indication
00.01 (1 second) to 60.00 (60 minutes) [Minute.Second]
Ratio
1.00 times
IN
OUT
Sets the ratio.
For computing equation and input/output diagram, refer to Section 8.2.4.
(p.17)
Setting range: 0.10 to 4.00 times
Bias
0%
IN
OUT
Set the bias.
For computing equation and input/output diagram, refer to Section 8.2.4.
(p.17)
Setting range: -100 to 100%
