23
Check if the display is as follows.
^B P10000258E0^C
-------------------------------------------------------------------------------------------------------------------------------------
^F
E0^C
As Example 2 below, execute the setting command of the main setting value.
(When the main setting value for Program pattern 3 Step 4 is set to 850 [Address: 0])
To execute the command, input it from Header (STX) "^B" to Data with the key, and press
the
(Enter) key.
(Example 2)
^B P
1 3 4 0 0 3 5 2
Data: 850 (0352H)
Data item: (1340H)
Command type [Setting]: (50H)
Sub address: 0 (20H)
[00H + 20H = 20H]: " " space
Address : 0 (20H)
[00H + 20H = 20H]: " " space
Header: STX (02H)
Press the <B> while the <CTRL> is
being pressed.
The checksum is automatically calculated, and it is sent with the delimiter (ETX).
^B P 1 3 4 0 0 3 5 2 D E ^C
Delimiter ETX (03H)
Checksum
When the command finishes normally, it responds as follows.
^F E 0 ^C
Delimiter ETX (03H)
Checksum
Address
Header ACK (06H) Acknowledgement
Check if the display is as follows.
^B P13400352DE^C
----------------------------------------------------------------------------------------------------------------------------------
^F
E0^C
