39
7.11 Setting the same value to all controllers simultaneously (Broadcast setting function)
Press the CH key for approx. 1 second in the Main setting mode or Sub setting mode.
The unit enters Broadcast setting status, indicating
on the CH display.
Set items, then press the
key. The same set value will be set to all connected
controllers simultaneously.
If SV is changed, the SV in the Set value memory number will also be changed.
If the controllers connected to the LMD-100 are not under the same condition, broadcast
setting is not always possible.
To release Broadcast setting function, press the
key for approx. 1 second again.
7.12 PV, SV 5-digit indication
When PV or SV is 5-digit number, the indication will be as follows.
• (e.g.) 10000 : [
] and [
] are alternately indicated.
• (e.g.) –2000 : [
] and [
] are alternately indicated.
• (e.g.) –10000 : [
] and [
] are alternately indicated.